ADIPEC 2026 / 2–5 NOVEMBER / ADNEC ABU DHABI
Cmets Energy × Inland Tarp & Liners are at ADIPEC
Drilling and boring sites come first: fabricated pad liners and containment that get a site ready faster. Behind them sits Inland's full range of geotextile, lagoon and landfill lining, pond liners and covers, supported on the ground in the UAE by Cmets Energy. Visit Hall 7, Stand 7457.
- Hall 7 : Stand 7457
- 4 Days : 2 – 5 Nov 2026
- 2,250+ : ADIPEC exhibitors
- Promo Code : ADEM490
- 00Days
- 00Hours
- 00Minutes
- 00Seconds
Your next drilling pad starts at Stand 7457.
- Hall 7 : Stand 7457
- 4 Days : 2 – 5 Nov 2026
- 2,250+ : ADIPEC exhibitors
Built for the people on the drill site
If you plan, run or supply a drilling site, this stand is for you.
Our first conversation is with the engineers and supervisors of national and international operators and service companies, and the subcontractors who prepare, build and maintain their sites. The same stand also serves the teams who manage waste, water and power assets.
The partnership
Two specialists. One site-protection solution.
Cmets Energy and Inland Tarp & Liners are showing together at ADIPEC 2026 to bring factory-fabricated containment, lining and covering solutions closer to UAE and Middle East operations, starting with drilling.
Cmets Energy
ISO 9001:2015 certified system integrator specializing in industrial automation and system engineering, based in Abu Dhabi, and clients and partner across the globe
- Local presence and long-standing relationships across UAE, GCC & MENA energy operators
- Industrial automation and control system integration, from design to commissioning
- System engineering mindset: right solution, right site, right schedule
- On-the-ground technical support and follow-up for your project team
Inland Tarp & Liners
Employee-owned since 2020. Custom geosynthetic fabricator serving oil and gas from the Permian, Bakken, Marcellus and Utica to the Middle East, plus landfill, water, mining and agriculture.
- Capacity to produce 300 million sq ft a year
- Large single-piece factory-fabricated liners and covers
- Liners, non-woven geotextile, containment walls, covers
- CAD drawings and panel layouts for a precise fit
How we serve the UAE & Middle East together
Inland engineers and fabricates the product. Cmets Energy brings it to your region, speaks your project language, and stays with your team from first enquiry to site delivery. The result is a shorter path from site plan to a protected, ready site, and a single point of contact in Abu Dhabi.
Solutions for drilling & boring installations
Protect the pad. Protect the programme.
The Inland range most relevant to drilling and boring site installations, available to review with our team at Stand 7457.
Drilling & Completion Pad Liners
Coated woven polyethylene (CWPE) in the XGL series: anti-slip surface and high puncture strength for direct traffic. Large single-piece fabricated panels cover the whole pad with limited to no field seaming.
CWPE · XGL series · Anti-slip · Minimal field seams
Poly Dike Containment Walls
Engineered secondary containment for short or long-term use. Lightweight, modular and flexible, installed without hand tools or heavy equipment, and reusable in a different footprint.
Walls 0.3 m – 1.22 m (1′ to 4′) · Reusable · Stackable for shipping
Pit, Frac & Impoundment Liners
Large fabricated LLDPE liners for pits and impoundments that cut installation time significantly. Custom sizes for long-term use in harsh climatic conditions.
LLDPE 30–60 mil · Produced water · Frac storage · Custom sizes
Tank & One-Piece Liners
One-piece stepped liners for fresh water and brine storage, with specialty liners for oil and condensate. Custom tank covers available.
One-piece · Brine · Oil & condensate
Foam Berms & Ramps
Custom-fabricated foam berms and ramps for fast, flexible containment around tanks and equipment on site.
Square & triangular profiles · Covered or uncovered
Insulated Floating Covers
Single-piece covers that reduce evaporation, odour and contamination, an economical way to protect temporary storage on site.
Single-piece · Ponds & tanks
Beyond the drill site
The full Inland range, on one stand.
Drilling is where we start. If your scope also includes waste containment, water management or bulk material storage, the same fabricated approach applies.
Waste & environmental containment
Landfills & hazardous waste lagoons
Geomembrane liner and cap systems that keep leachate from migrating and protect groundwater, with geotextile layers for cushioning, drainage and filtration.
- HDPE geomembrane for landfills, waste lagoons and secondary containment
- LLDPE liners and caps, factory-fabricated to project dimensions
- Final cover and capping systems for closure and long-term stability
- Non-woven geotextile as protective cushion under and over the liner
- Reinforced Concrete Roll® (RCR®) for stormwater and erosion control on slopes
Non-woven geotextile
The layer that protects the liner.
Inland supplies needle-punched, non-woven geotextile (felt) as roll stock or as custom-fabricated, one-piece underlayment. Under a geomembrane it cushions against punctures; in drainage and road or rail applications it filters and stabilises soil.
Why liners fail in the UAE
The desert is hard on liners. Specify for it.
A liner that performs in a temperate climate can fail early here. Six site conditions do most of the damage. For each one, this is how the liner, the geotextile and factory-fabricated seams are used to answer it.
45°C+ surface heat
Extreme heat
Hot, exposed liner expands and contracts every day. It wrinkles, drags on the subgrade and stresses the seams. Field welding is limited to cooler hours.
Liner
Flexible LLDPE is made for performance in extreme hot and cold weather. Light colours (white or gray) are available and take on less heat than black.
Geotextile
A non-woven layer separates the liner from the rough subgrade, so daily movement does not drag it across stones.
Factory seams
Seams are made indoors in a controlled environment, not welded on a 45°C pad at midday.
Strong UV, year-round
Sun & UV exposure
Ultraviolet light breaks polymer down over time. Exposed liners go brittle first at edges, folds and seams.
Liner
HDPE and LLDPE geomembranes are chosen for UV stability. CWPE is coated on both sides over a woven scrim for tear and puncture strength.
Geotextile
Use it as a buried layer under a cover. Keep it covered, since fabric left exposed is not a UV solution.
Factory seams
Large single-piece panels mean fewer seam edges to age and fewer to inspect in the field.
Windblown sand
Sand abrasion & wind
Sand scours exposed surfaces, and wind lifts loose edges. Traffic grinds grit into the liner on drilling pads.
Liner
Reinforced CWPE (the XGL series) has an anti-slip surface and high puncture strength. It is built to take direct traffic on a pad.
Geotextile
Felt cushions the liner from sharp sand, stone and debris beneath it.
Factory seams
Fewer seams means fewer places for wind to start peeling. Anchor trenches and edge details are drawn on the CAD layout.
Saline sabkha soil
Saline soil
Salt in the ground attacks materials and works into any weakness. Brine stored above it can leak into the soil.
Liner
HDPE is an impermeable, chemical-resistant barrier. It is used for waste lagoons, water storage and secondary containment.
Geotextile
Separates and filters, so fine saline soil does not migrate into or through the lining system.
Factory seams
Seams made in a controlled factory are less exposed to dirt and moisture than those welded in the field.
High coastal water table
Groundwater below
Near the coast, water and gas can build up under a liner. This pushes it up, stresses seams and floats empty ponds.
Liner
Thickness and material are sized to the pond, and the design accounts for uplift when the pond is empty. This is an engineering call per site.
Geotextile
Drainage and filtration layers beneath the liner give water and gas somewhere to go. Inland also offers geocomposites for this.
Factory seams
Tested factory seams keep their strength when the liner is stressed from below.
Sudden heavy rain
Flash rain & runoff
Rare but intense rain floods pads and pits, washes out embankments and can catch a liner mid-installation.
Liner
Lined stormwater and sediment ponds hold runoff. RCR® is used for slope armouring and erosion control on embankments.
Geotextile
Filters water through slopes and drains while holding soil in place, which helps limit washouts.
Factory seams
Shorter installation means a smaller window in which a rain event can hit the job.
Specified for UAE sites
Cmets Energy is based in Abu Dhabi and works these conditions every day. Bring your site brief to Stand 7457 and we will help you choose material, thickness, colour, geotextile weight and anchoring for the actual ground, temperature and water table you are dealing with, then pass it to Inland’s team for CAD layout and fabrication.
Relevant to the UAE
Where this fits in the Emirates.
Beyond upstream oil and gas, the same lining, containment and cover technology applies to the utilities and water infrastructure that Cmets Energy already serves. These are the application areas to bring to our team at the stand.
Desalination
Brine ponds & evaporation basins
Impermeable lining for brine and concentrate storage, where leak prevention protects soil and groundwater.
- HDPE and LLDPE geomembranes, smooth or textured
- Geotextile cushion layer beneath the liner
- Single-piece panels to reduce field seams in hot conditions
Power plants
Process, retention & containment lining
Containment for ponds, tank farms and bunded areas at power and combined water-and-power sites.
- Secondary containment walls and foam berms around tanks
- Pond and retention basin lining
- Stormwater runoff and erosion control
Water & wastewater
Storage, lagoons & treatment ponds
Liners and covers for water storage and wastewater treatment infrastructure.
- Pond and lagoon liners; potable-water specialty liners
- Floating covers to cut evaporation and odour
- Sediment ponds and canal lining with RCR®
Waste & environment
Landfills & hazardous waste lagoons
Leachate barriers, caps and drainage layers for waste facilities across the region.
- Liner and final-cover systems
- Non-woven geotextile for protection and drainage
- Custom panel layouts from CAD drawings
Ports & bulk materials
Grain, salt & sand stockpiles
Heavy-duty covers that protect stored commodities and bulk materials from weather.
- Reinforced covers in 12–24 mil
- White for cooler storage in summer heat
- Flat sheets up to 3 acres
Why Inland
Fabricated in the factory. Ready for the field.
Moving the welding out of the field and into a controlled factory is the Inland advantage for drilling sites.
sq ft annual production capacity
20 M
Single-Piece Fabrication Capacity
20
non-woven geotextile weight range
20 - 24 oz
Employee-Owned Since 2020
20
Rolled stock in the field
Inland factory fabrication
How we support your team
From site brief to ready pad.
One process, one contact in Abu Dhabi, with Inland's engineering team behind it.
Share the site brief
Pad or pit dimensions, fluids, traffic loads, climate and timeline. Bring drawings to the stand or send them after the show.
Fabricate & ship
Panels are fabricated and seamed in the factory, then coordinated for delivery to your site in the region.
Engineer the layout
Inland’s team recommends materials and prepares CAD drawings and panel layouts for your specific footprint.
Install & follow up
Your subcontractors install with fewer field welds, while Cmets stays in touch on schedule and next-phase needs.
Meet us at ADIPEC 2026
Hall 7 · Stand 7457
Book a slot so the right engineer is waiting for you, or simply walk in. Bring your drilling-site drawings and we will talk through the options on the spot.
Our Partners and collaborations
Industries Served
OIL&
GAS
POWER-PLANTS & DESALINATION
WATER & WASTE WATER
DISTRICT COOLING PLANTS – DCP & HVAC
Industries Served
OIL&
GAS
POWER-PLANTS & DESALINATION
WATER & WASTE WATER
DISTRICT COOLING PLANTS – DCP & HVAC
STEEL | ALUMINIUM | MINING
FOOD & BEVERAGE PHARMACEUTICALS
NUCLEAR
ENERGY
SOLAR | GREEN ENERGY
PAPER |
PLASTIC
STEEL | ALUMINIUM | MINING
FOOD & BEVERAGE PHARMACEUTICALS
NUCLEAR
ENERGY
SOLAR | GREEN ENERGY
PAPER |
PLASTIC
OEMs & MANUFACTURERS
AVIATION
CEMENT
OEMs & MANUFACTURERS
AVIATION
CEMENT
OEMs & MANUFACTURERS
Our Clients
Innovate. Automate. Decarbonize.
ADIPEC brings the world's energy industry to Abu Dhabi. So do we.
Whether your drilling programme is in the Emirates, elsewhere in the Middle East or run from a European head office, Hall 7 Stand 7457 is where you can meet the team and the fabricator in one conversation.